Başlık için Mühendislik ve Mimarlık Fakültesi listeleme
Toplam kayıt 720, listelenen: 538-557
-
Potential application of nanobiotechnology for creating various diagnostic approaches for diseases in livestock
(Elsevier, 2023)The main research of nanobiotechnology and medical biotechnology focuses on the development of novel, rapid, and portable diagnostic methods to determine complex diseases. Animals are the main source of our foods (milk, ... -
Potential biomarker of circulating hsa-miR-1273g-3p level for detection of recurrent epithelial ovarian cancer
(Springer, 2018-12)PurposeOvarian cancer (OC) is first gynaecologic cancer that causes women death and epithelial ovarian cancer (EOC) is the most lethal ovarian cancer type. While treatment is commonly successful, some cases (10-20%) show ... -
Potential of Rosmarinus officinalis for Phytoremediation of Soil Contaminated with Cadmium
(Yüzüncü Yıl Üniversitesi Ziraat Fakültesi, 2018)Abstract: In this study, the use of Rosmarinus officinalis was investigated to clear soil contaminated with Cd. The soil sample for pot experiment is taken from the old municipal waste storage in Mardin. The pot ... -
Practical equations for constitutive model of design-oriented FRP-confined concrete rectangular members
(Elsevier Ltd, 2024)The strengthening with Fiber Reinforced Polymer (FRP) offers one of effective solution to increase strength, axial load and deformation capacity of reinforced concrete (RC) members. However, the use of FRP-confined models ... -
Practical Evidence-Based Evaluation of a Combined Heat Reduction Technique for Power Transformer Buildings
(MDPI, 2020)Transformer buildings are at the heart of the effective operation of distribution systems, and heating problems of transformers under severe operational conditions are among the main factors affecting the lifetime, efficiency, ... -
Precise measurements of branching fractions for D-s(+) meson decays to two pseudoscalar mesons
(Springer, 2020)We measure the branching fractions for seven D-s(+) two-body decays to pseudoscalar mesons, by analyzing data collected at root s = 4:178 similar to 4:226 GeV with the BESIII detector at the BEPCII collider. The branching ... -
Precision Measurement of the Branching Fractions of eta ' Decays
(Amer Physic Soc., 2019-04-09)Based on a sample of (1310.6 +/- 7.0) x 10(6)J/psi events collected with the BESIII detector, we present measurements of J=. and. 0 absolute branching fractions using the process J/psi -> gamma eta'. By analyzing events ... -
Precision measurements of the e(+)e(-) -> (KSK +/-)-K-0 pi(-/+) Born cross sections at center-of-mass energies between 3.8 and 4.6 GeV
(Amer Physic Soc., 2019-04-11)Using data samples collected by the BESIII detector operating at the BEPCII storage ring, we measure the e(+)e(-) -> (KSK +/-)-K-0 pi(-/+ )Born cross sections at center-of-mass energies between 3.8 and 4.6 GeV, corresponding ... -
Precision Study of eta ' -> gamma pi(+) pi(-) Decay Dynamics
(American Physical Society, 2018)Using a low background data sample of 9.7×105 J/?????, ?????+?- events, which are 2 orders of magnitude larger than those from the previous experiments, recorded with the BESIII detector at BEPCII, the decay dynamics of ... -
Precursors of earthquakes: VLF signals-ionosphere relation
(2012)A lot of people have died because of earthquakes every year. Therefore It is crucial to predict the time of the earthquakes reasonable time before it had happed. This paper presents recent information published in the ... -
The prediction of the ZnNi thickness and Ni % of ZnNi alloy electroplating using a machine learning method
(Taylor and Francis Ltd., 2021)ZnNi alloy coating is commonly used to enhance the corrosion resistance of steel. The percentage of Ni should be maintained between 12% and 14% in the coating for best corrosion performance. The response surface design ... -
A preliminary study for remote healthcare system: Activity classification for elder people with on body sensors
(Institute of Electrical and Electronics Engineers Inc., 2018)Development of intelligent care system for elder people have been investigated in recent years. In this study, to detect emergency situations for elder people, activity classification was aimed using on body sensor data. ... -
Preparation and evaluation of cerium oxide-bovine hydroxyapatite composites for biomedical engineering applications
(Elsevier, 2014)The fabrication and characterization of bovine hydroxyapatite (BHA) and cerium oxide (CeO2) composites are presented. CeO2 (at varying concentrations 1, 5 and 10 wt.%) were added to calcinated BHA powder. The resulting ... -
Pressure Effect on Thermodynamic Quantities for the Solid-Liquid Phase Transition in n-tridecane, n-hexadecane and n-octadecane
(International Journal of Thermodynamics, 2024)The pressure effect is investigated regarding the solid - liquid equilibria (SLE) in n-alkanes. Using the Landau phenomenological model, the pressure dependences of the thermodynamic functions are predicted and the phase ... -
Probabilistic assessment for spectrally matched real ground motion records on distinct soil profiles by simulation of SDOF systems
(Techno-Press, 2021)Selection of appropriate ground motion records for dynamic analysis has uttermost importance since it significantly affects structural responses which are used for seismic performance assessment of buildings. This study ... -
Problemlerle akışkanlar mekaniği
(Hiperlink Yayınları, 2020)İnsanoğlu, bilindiği üzere, milattan önce 5000 yıllarından başlayarak, su ile birlikte yaşamış, su potansiyeli ile gereksinimleri arasında, günün koşullarına göre, dengeleri sağlamağa çalışmış, bir yandan suyun faydalarını ... -
Production and characterization of electrospun fish sarcoplasmic protein based nanofibers
(Elsevier Sci Ltd., 2018)In this study, poly (e-caprolactone) (PCL) and fish sarcoplasmic protein (FSP) (Mw < 200 kDa) composite nanofibers were fabricated by electrospinning technique. Solution properties such as density, viscosity, conductivity ... -
Production of apatite from snail shells for biomedical engineering applications
(Trans Tech Publications Ltd, 2016)Bioceramics is very important application for dental and orthopedic procedures. Beside all these normal procedures traffic accidents are requiring increasing number of graft, prostheses and orthosis applications. Bioceramics ... -
Production process evaluation and improvement by using the method of discrete event simulation
(EUROSIS, 2017)The label printing and packaging industry has a rapidly growing and evolving market in the world. The most important aim of the companies is to accomplish the demand and expectations of the customers in the market. Label ... -
A Proposed Methodology for Risk Classification Using Fuzzy Group Decision Making and Fuzzy C-Means
(Springer Science and Business Media Deutschland GmbH, 2022)Clean production and resource efficiency are two major concerns of contemporary manufacturing processes. The main reason is that the resources and environment are significant concerns for the future. The study proposes the ...